facebook

Swifty setup

Now that your Swifty has arrived, here’s a step-by-step guide to getting started.

1

Register your Swifty

First, you’ll need to register your machine using the serial number that came inside your Swifty box. When you’ve done this, you’ll gain access to our online support area of the website, and be able to download your software.

2

Set up your machine

It’s time to set up your machine! You can download our detailed manual for guidance on getting your machine up and running. We’ve also created a how-to video, which takes you through every stage of the process.

3

Download and install software

Now that your machine is registered, you’ll be able to download and install your Swifty software. Download our software installation manual for a step-by-step guide to the entire process.

4

Start cutting

Before making your first cut, double check that the table is completely level. Your machine comes with a 2mm sheet of mild steel for testing, and you can find a video guide to making your first cut here: